For solvent and chemical compatibility. Item R111EP with 11,81 mm inner diameter and 2,82 mm thickness. Application: O-ring for neu bushing B100015 with 25mm GL thread.

With two 9mm O.D. sidearms sealed to the barrel at a 90° angle to one another. With vacuum metering plug. Viton® O-ring on PTFE shaft is protected with precision Teflon® wiper. The plug has a machined-in integral PTFE tip O-ring to make...

With two 9mm O.D. sidearms sealed to the barrel at a 180° angle to one another. Viton® O-ring on PTFE shaft is protected with precision Teflon® wiper. The plug has a machined-in integral PTFE tip O-ring to make the primary seal. This...

With two 9mm O.D. sidearms sealed to the barrel at a 90° angle to one another.The non-rotating PTFE plug has three O-rings, the tip O-ring making the primaryseal on the precision formed tapered seat.

With two 9mm O.D. side arms bent to minimize hold up of liquids. With vacuum metering plug. Viton® O-ring on PTFE shaft is protected with precision Teflon® wiper. The plug has a machined-in integral PTFE tip O-ring to make the primary...

Precision ground with corresponding numbers on the barrel and plug Lower vacuum chamber is evacuated via a separate 2mm hole in the plug which is not in the line of flow

With three 9mm O.D. sidearms sealed to the barrel at a 90° angle to one another. The non-rotating PTFE plug has three O-rings, the tip O-ring making the primaryseal on the precision formed tapered seat. 0-12mm vacuum valve, T-type, complete

Stopcock with three stems sealed 90° apart. Teflon® plug has a “T”-shape bore to connect any two or all three stems. With 1:5 PTFE metering plug and a threaded pressure nut Stopcock barrels are polished to prevent PTFE plug from scratch

With three 9mm O.D. side arms. The non-rotating PTFE plug has three O-rings, the tip O-ring making the primary seal on the precision formed tapered seat.

With 1:5 PTFE metering plug and a threaded pressure nut Stopcock barrels are polished to prevent PTFE plug from scratch

Stopcock with three stems sealed 90° apart. Glass plug has a “T”-shape bore to connect any two or all three stems. Solid glass plug with constant pressure retention spring and clip.

A 1:5 taper Teflon® stopcock with three side arms sealed 120° apart. Plug has a bore to allow connection of any two arms at once. With 1:5 PTFE metering plug and a threaded pressure nut Stopcock barrels are polished to prevent PTFE plug...