Top seller
Close filters
 
  •  
from to
1 From 2
No results were found for the filter!
Schlenk tube F58D, storage, protective covering, vacuum valve Schlenk tube F58D, storage, protective...
Supplied with vacuum valve with PTFE O-ring at tip and PTFE wiper ( “umbrella”) to protect Viton® O-ring on shaft.
From €35.35 * €40.75 *
Vacuum trap, integral Vacuum trap, integral
Integral designed trap with serrated hose connections.
From €20.25 * €28.25 *
Flask* F71, 3-neck, round bottom, vertical, threaded inlet Flask* F71, 3-neck, round bottom, vertical,...
Round bottom, three-neck flask with standard taper outer joints and a thermometer joint. Supplied complete with a compression cap and Viton® O-ring. For insertion of plain thermometers or bleed tubes having an O.D. between 5.0-7.0 mm....
From €38.85 * €42.85 *
Flask F31V, 1-neck, recovery, #15 O-ring joint Flask F31V, 1-neck, recovery, #15 O-ring joint
Please order Viton® O-ring, size 116 separately. Heavy wall design. All sizes listed below are hand-blown from tubing to ensure uniform wall thickness.
From €12.50 * €14.50 *
Flask F34, 2-neck, pear shaped, angled Flask F34, 2-neck, pear shaped, angled
With angled side joint. Heavy wall design. All sizes listed below are hand-blown from tubing to ensure uniform wall thickness.
From €12.50 * €15.50 *
Flask F13, 1-neck, pear shaped, threaded inlet Flask F13, 1-neck, pear shaped, threaded inlet
With a threaded side port for insertion of thermometer or bleed tubes, having an O.D. between 5mm and 7.5mm. Heavy wall design. All sizes listed below are hand-blown from tubing to ensure uniform wall thickness.
From €12.95 * €15.95 *
Flask F30V, 1-neck, round bottom, #15 O-ring joint Flask F30V, 1-neck, round bottom, #15 O-ring joint
Please order Viton® O-ring, size 116 separately. Heavy wall design. All sizes listed below are hand-blown from tubing to ensure uniform wall thickness.
From €12.50 * €14.50 *
Flask F33, 1-neck, round bottom, with hooks Flask F33, 1-neck, round bottom, with hooks
With two hooks for s.s. springs TH018. Heavy wall design. All sizes listed below are hand-blown from tubing to ensure uniform wall thickness.
From €9.25 * €11.25 *
Flask F14, 1-neck, round bottom, threaded inlet Flask F14, 1-neck, round bottom, threaded inlet
With a threaded side port for insertion of thermometer or bleed tubes, having an O.D. between 5mm and 7.5mm. Heavy wall design. All sizes listed below are hand-blown from tubing to ensure uniform wall thickness.
From €13.25 * €15.25 *
Flask F12, 1-neck, flattened bottom Flask F12, 1-neck, flattened bottom
Flat bottom for a stable stand. Heavy wall design. All sizes listed below are hand-blown from tubing to ensure uniform wall thickness.
From €5.90 * €7.50 *
Distillation, link, short-path, for volatile solvents, Vigreux Distillation, link, short-path, for volatile...
With the condenser being a combination of a cold coil and Liebig. Top outer joint is a 10/18 for use with a 50mm immersion thermometer (T165025). Similar to D53, but with Vigreux indentations. For best result, use D272440 receiver.
From €84.25 * €97.25 *
Distillation, link, short-path, for volatile solvents Distillation, link, short-path, for volatile...
With the condenser being a combination of a cold coil and Liebig. Top outer joint is a 10/18 for use with a 50mm immersion thermometer (T165025). For best result, use D272440 receiver.
From €79.55 * €93.55 *
1 From 2
Viewed