Products from Synthware
No results were found for the filter!
EP O-ring, size 111
For solvent and chemical compatibility. Item R111EP with 11,81 mm inner diameter and 2,82 mm thickness. Application: O-ring for neu bushing B100015 with 25mm GL thread.
In-Ex-Tube 29T for gases related organic reactions
In-Ex tube was designed for gases related organic reactions. By using this special designed reaction tube, several gases relied organic reactions are applicable, including CO, SO2 and H2. Ex-situ gas production takes place in a reaction...
From €32.95 * €42.25 *
Bubbler B25D, mineral oil, with check valve
With 10mm O.D. hose connection. With check valve.
€32.95 * €42.25 *
Adapter A24, anti-splash, with perforated glass...
Similar to A23 except with perforated glass plate sealed above lower inner joint. Perforated glass plate reduces foam from being carryover.
From €48.00 *
Microscale, condenser C34, Dewar, 14/23, 90°
Dewar-type Condenser. Diameter of the inner tube is 31mm. Side 14/23 outer joint with 90° angle.
From €56.25 *
Microscale, condenser C28, Dewar, 14/23, 105°
Dewar-type Condenser. Diameter of the inner tube is 31mm. Side 14/23 outer joint angled by 105°.
From €52.25 *
Valve, Vacuum, PTFE-Plug, protected O-ring,...
With two 9mm O.D. sidearms sealed to the barrel at a 90° angle to one another. With vacuum metering plug. Viton® O-ring on PTFE shaft is protected with precision Teflon® wiper. The plug has a machined-in integral PTFE tip O-ring to make...
From €29.95 *
Stopcock S34, glass, hollow plug, vacuum, oblique
Precision ground with corresponding numbers on the barrel and plug Lower vacuum chamber is evacuated via a separate 2mm hole in the plug which is not in the line of flow
From €39.85 *
Valve S59, Vacuum, PTFE-Plug, O-ring, T-type
With three 9mm O.D. sidearms sealed to the barrel at a 90° angle to one another. The non-rotating PTFE plug has three O-rings, the tip O-ring making the primaryseal on the precision formed tapered seat. 0-12mm vacuum valve, T-type, complete
Stopcock S16, 1:5, PTFE, T-bore
Stopcock with three stems sealed 90° apart. Teflon® plug has a “T”-shape bore to connect any two or all three stems. With 1:5 PTFE metering plug and a threaded pressure nut Stopcock barrels are polished to prevent PTFE plug from scratch
From €21.65 *
Valve S58, Vacuum, PTFE-Plug, O-ring, 3-way
With three 9mm O.D. side arms. The non-rotating PTFE plug has three O-rings, the tip O-ring making the primary seal on the precision formed tapered seat.
From €39.85 *